久久婷婷五月国产色综合,疯狂的欧美乱大交,少妇人妻不卡一区二区

BYD high-rise storage electric forklift customization-

③After charging is completed, turn off the power supply and charger, and then unplug the charger

Check whether the bearings are running well

Compared with internal combustion forklifts, they have the advantages of no pollution, easy operation, energy saving and high efficiency

Once the battery has problems, the all-electric transporter will not work properly

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust

Of course, other forklift manufacturers could not sit still as their small electric forklifts sold so well, and quickly launched their own brands of small electric forklifts The forks are raised by an advanced electric hydraulic pump, and the forks are raised and lowered by the lifting and lowering operating handle

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

The second is three-dimensional warehousing based on shuttle vehicles, which is mainly used in scenarios with medium and low shelves and strong product homogeneity

Electric transport trucks are no exception

The reach truck has a small lifting capacity and is driven by an electric motor

For example, the oil disc valve cover is not easy to compact due to the large contact area, which may cause oil leakage

BYD high-rise storage electric forklift customization-

Especially in ports, warehousing, tobacco, food, textile and other industries, reach electric forklifts are gradually replacing internal combustion forklifts

High-position side fork detection: Test the stability of the side fork at different loads, different side fork heights, and different fork entry speeds

5 The editor of New Energy Forklift will share it with you below: What are the operating procedures for electric forklifts? 1 Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering

Tilt the joystick to tilt the mast so that it is in a vertical position

Core data of this article: Electric forklift production volume, electric forklift consumption volume, forklift market electrification rate An electric forklift is a forklift that uses batteries as the source of power to drive the travel motor and hydraulic system motor to achieve travel and loading and unloading operations

Lithium batteries save more than 40% of electricity

Before moving the forklift, you must check whether the brakes and batteries are fully charged

According to the type of forklift body, they are divided into pallet stacking unmanned forklifts, counterbalanced unmanned forklifts, leg-type unmanned forklifts, forward-moving unmanned forklifts, multi-directional unmanned forklifts and side stacking unmanned forklifts

There may be no problems with various key functions and the electric truck can complete the work, but if these problems are not paid attention to, more problems will arise, and serious problems may cause the vehicle to be directly paralyzed, directly affecting the service life of the truck

The new generation of electric forklifts will have better maintainability and operability, and the display and fault diagnosis systems will be more complete Different cold chain products have different requirements for cold storage temperature, which also determines the different grades of cold storage forklifts, as shown in Table 1 and Table 2

In addition, the quality of the electric truck's motor, battery and other important parts also determines its price

BYD high-rise storage electric forklift customization-

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

have all laid out their layout in the forklift field

Hydraulic oil, gear oil, and lubricating oil all use special low temperature resistant grease, which can enable the vehicle to obtain long-term stable hydraulic and transmission performance in the cold storage It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

After many R&D improvements, the durability, reliability and applicability of electric forklifts have been significantly improved, completely surpassing internal combustion forklifts

If the road conditions are good, the vehicle will continue to accelerate

5 meters, 4

Speed regulating device It operates normally at 24V voltage and the speed is adjusted by electronic control

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

Electrical component reliability The main measures taken for electrical components are to prevent freezing and rust

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design

Unmanned forklifts are more efficient, more stable, more accurate and safer than forklifts

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info