蜜桃av亚洲精品一区二区,西西大胆午夜人体视频,加勒比一区二区欧美天天爽

BYD reach-type lithium battery forklift maintenance- 3 The electric transporter manufacturer tells you that when the speed is adjusted to the rabbit speed, it is suitable for use in wide places with few people and suitable for driving longer distances

If the abnormal noise is caused by damaged parts, we can consult the truck manufacturer for repair or replacement

With the deepening of the new energy revolution, forklifts are in the process of switching from lead-acid batteries to lithium batteries and hydrogen fuel cells, from traditional to intelligent, and from extensive management to refined management

Some manufacturers are comprehensive manufacturers, with complete sales, production, after-sales maintenance and other departments, with clear division of labor, and can provide one-stop services for enterprises, and the price of forklifts will be slightly higher

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

People usually have this idea that if the quality and after-sales service are good, the price of the forklift will generally be high, while the lower-priced electric transport trucks are often greatly discounted in quality When companies purchase electric forklifts, they are always confused by the various products and repeatedly compare the prices, quality and after-sales services of various electric forklift brands, and they are hesitant To prevent this problem, truck manufacturers recommend that you try to avoid overcharging, monitor the temperature of the electrolyte during charging, and do not use electrolytes with too high a relative density Which type of transporter is more suitable for them? Below, the electric transporter manufacturer will analyze the pros and cons of the two

When using electric transport trucks, please pay attention to the following matters: 1

Internal combustion forklifts are large and cumbersome to operate In 2021, the total sales volume of lithium-ion forklifts in my country reached 333,000 units, a year-on-year increase of 106

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

BYD reach-type lithium battery forklift maintenance-

■ High power The dual-motor integrated design greatly improves the load capacity of the electric forklift

Both have their own characteristics

to maintain the stability of the forklift

It can be seen that the application of 5G Internet of Things technology has realized the informatization, transparency and intelligence of the entire logistics

have all laid out their layout in the forklift field

Electric transport truck manufacturers remind everyone that the motor, battery and other important parts of the electric transport truck must be checked regularly

The combined effects of subtropical, humid tropical, marine climate environment and industrial waste gas and dust cause corrosion and damage to the parts of internal combustion forklifts

Using them brings great convenience to our work and can also reduce labor costs and manual labor Note: If the fully electric pallet truck works in a cold and humid environment, it should be equipped with low-temperature oil to adapt to the environment

Check whether the insulation and connecting parts are damaged or loose

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards

Full AC control system 5

BYD reach-type lithium battery forklift maintenance- At this time, the plate will appear rotten, and the active material will form blocks and accumulate between the two separators, resulting in a decrease in the capacity of the battery

Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment

Notice! Operating the stacking forklift at low voltage for a long time will damage the battery life The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

(2) High safety: Able to withstand the most severe conditions; it will not catch fire or explode after tests such as collision, extrusion, puncture, fire, high and low temperatures; and impact

The Spring Festival is coming soon, and the working intensity and workload of electric forklifts have greatly increased

When performing fill welding, it is recommended to use DC reverse polarity arc welding

Mainly: 1

are all protected to reduce the occurrence of faults

We always take meeting customer requirements as our business philosophy, strictly control quality, strive to improve work efficiency, and strive to provide individuals or companies with electric trucks that meet market needs

A higher service life represents lower use costs, plus savings in maintenance staff salaries and raw material costs

Not charging Phenomenon: When the electric stacker is charging normally, the charger light does not turn red, indicating that the battery is not charging

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info