熟妇人妻久久中文字幕,中文精品一卡2卡3卡4卡,国产成人一区二区在线播放

BYD lift maintenance standards-

Abstract: In order to reduce the width of the stacking channel and improve the storage capacity and storage efficiency, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift

Then there is the size of the battery box, large and small batteries

The auxiliary wheels are usually screwed on and can be replaced by loosening the screws

The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius

This is an obstacle

When there are obstacles or pedestrians on the route, the vehicle will automatically stop or give way, reducing the bumps and damage associated with handling, ensuring that the materials are transported to the designated location in good condition, and greatly reducing the uncertainty caused by manual forklifts

The full load climbing ability of more than 8% makes the operation more common

Technical characteristics of cold storage forklifts In view of the harsh working conditions of low temperature and high humidity in cold storage, cold storage forklifts should take meeting technical characteristics as the goal and take countermeasures to ensure the normal operation of the forklifts Note: If the fully electric pallet truck works in a cold and humid environment, it should be equipped with low-temperature oil to adapt to the environment Types of forklift wheels: Forklifts are basically divided into drive wheels, load-bearing wheels, and auxiliary wheels At present, most companies use this technology

During peak hours, a large number of trucks are waiting in line for loading and unloading operations

The speed of BYD forklifts can be set to 10KM/H, and the functions of turning speed reduction and high-speed limit are equipped to further ensure the safety of goods and personnel; the humanized design makes the driver more comfortable to drive In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

BYD lift maintenance standards-

3 meters, and at least two masts are required; but the lifting height of the forklift will conflict with the mast height

Pay attention to driving speed because slippery areas can easily cause side sliding

5mm

The double-drive axle makes maintenance easier to operate and more convenient

The minimum ground clearance refers to the distance from the lowest point on the electric forklift body, excluding the wheels, to the ground

, Ltd

After years of development, the engine technology is relatively complete and the domestic price is not high

The operation is simple, safe and reliable

Improve production efficiency and complete material handling tasks efficiently, accurately, and flexibly

The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

BYD lift maintenance standards-

Step 7: Reverse and leave the working position

Note: If the fully electric pallet truck works in a cold and humid environment, it should be equipped with low-temperature oil to adapt to the environment

The vehicle moves backwards

Because the vehicle's walking and steering adjustment adopts electric 360-degree steering, it has the characteristics of energy-saving, high efficiency, stable product operation, easy to use, reliable, low noise, and zero pollution

warn! Do not operate a forklift with serious functional defects that endanger safety Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

The emergence of forklifts is a sign of maturity in the industrial field, breaking away from the shackles of traditional manpower supremacy

※ The brake function is normal

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

It has low electrostatic induction power, strong anti-interference ability, and stable and reliable operation

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info