97超碰人人人人人人少妇,亚洲视频日韩视欧美视频,无码专区中文字幕无码

BYD ECB16S Battery forklifts Manufacturer phone

It is the simplest, most effective and most common loading and unloading and handling equipment in the warehousing, logistics and supermarket industries

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system

When turning left, the vehicle turns left; when turning right, the vehicle turns right

The first reason is the poor quality of the plate

At the same time, the Forward-looking Industry Research Institute also provides solutions such as industrial big data, industrial research, industrial chain consulting, industrial maps, industrial planning, park planning, industrial investment promotion, IPO fundraising and feasibility study, IPO business and technology writing, and IPO working paper consulting

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

Electric pallet trucks are driven by electricity, and the movement is controlled by the switch on the handle of the operating arm, and the steering is controlled by the operating arm

Comprehensive comparison and purchase As a relatively expensive industrial vehicle, when purchasing a forklift, compare the performance and price of as many products as possible to choose the product with the best cost performance

They are especially suitable for food, fishery, medical, chemical and other places

Hyster has added a new stand-on electric pallet truck, the S2

The constant pressure spring pressure borne by the carbon brush should be normal, and the total area of the carbon brush during the running-in period should not be less than 80%

Direct handling costs can be reduced by more than 25% compared to manual handling

When choosing, enterprises should consider their own operating requirements, budget, working environment and other conditions comprehensively to choose the most suitable truck

BYD ECB16S Battery forklifts Manufacturer phone When entering or leaving the work site or driving, pay attention to whether there are obstacles above Full load operation is not allowed (4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

4 Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading 5

The vehicle cannot be accelerated for a long time; 12

While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

What are they? The following is a brief sharing by BYD lithium battery forklift: It needs to be emphasized that the difference between lithium-ion forklifts and traditional electric forklifts is not as simple as replacing batteries

With the development of production technology, drivers no longer have to worry too much about the safety hazards caused by the quality problems of electric transport trucks, and it is also very easy to master the operation of transport trucks

BYD ECB16S Battery forklifts Manufacturer phone

The door frame shall not be deformed or welded off

The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high 3 This is the top priority

At lower temperatures, higher relative humidity is allowed

If you don't understand, you can also ask: Forklift manufacturer During operation, the driving speed can be reasonably controlled to meet different usage rhythms Now, most parts of the country are experiencing a cold and dry winter, which will have a certain negative impact on any mechanical equipment The same is true for food logistics

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

Especially in ports, logistics and warehousing, pharmaceutical, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts It also has the advantages of ultra-low noise and ultra-low vibration

Battery and charger use and maintenance: 1

In addition, each supplier will emphasize some technical innovation and design in the security protection details of their products, but as long as the previous ones are basically determined, these are things to be considered based on the procurement costs

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info