精品一区二区三区不卡,97精品依人久久久大香线蕉97,国产精品人妻一区二区高

Where can I repair BYD four-wheel battery forklift?-

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

The advantages of easy operation, simplicity and good speed also make electric transporters sell well in the market

But do you know how to choose the equipment that suits you? Next, the electric forklift manufacturer will lead you to understand how to choose a 3-ton electric forklift

When the rated nominal voltage is 1

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

Are you interested? Please pay attention to our official website to get more information about BYD forklifts, thank you all! How to operate BYD forklift for loading and unloading? BYD forklifts are widely used to transport bulk items

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward However, no matter how good the equipment is, if it is not properly maintained, it will frequently malfunction and its service life will not be long 2 The rollers shall rotate flexibly and the rollers and shafts shall be free of cracks and defects He believes that, except for a few companies, the overall technical level of domestic lithium-ion forklifts is not high

The other is to fix the wheel axle with an elastic pin, which needs to be knocked out with a punch

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

Warehouse forklift Warehouse forklifts are mainly designed for handling goods in warehouses

Where can I repair BYD four-wheel battery forklift?-

In addition, the all-electric transport trucks of electric forklift manufacturers are also equipped with high-pressure explosion-proof oil pipes and throttling safety valves to ensure the safe descent of the forks

?What are the advantages of BYD lithium battery forklifts? (1) Long life: Under normal charging and discharging conditions, after 4,000 cycles, the capacity retention rate is greater than 75%; the battery life can be maintained for more than 10 years; the forklift does not need to replace the battery during its life cycle

0SD offers increased speeds when loading and unloading, making it ideal for travelling long distances or working at loading docks

The forklift must not be started before the battery is fully charged

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

The lifting device also relies on the motor to drive the hydraulic pump to push the hydraulic oil in the hydraulic cylinder to achieve lifting and lowering

Applicable to various workplaces: such as factory workshops, docks, warehouses and other places for cargo loading and unloading

Because the vehicle's walking and steering adjustment adopts electric 360-degree steering, it has the characteristics of energy-saving, high efficiency, stable product operation, easy to use, reliable, low noise, and zero pollution

If the welding current enters the battery, it will cause damage when they are defective or unstable; (4) When unloading, ensure that the unloaded material racks are placed firmly and not tilted (9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise

Where can I repair BYD four-wheel battery forklift?- Control method: hydraulic control 7

The use of this equipment will not only reduce operating costs, but also protect the working environment to a certain extent, because this equipment has the characteristics of environmental protection and noise reduction

(2) Heavy-duty forklift: It uses a diesel engine as its power source, has a load-bearing capacity of 10

Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform

When replacing the hydraulic oil, make sure that the oil tank is clean, the oil is free of impurities, and the oil is sufficient

For example, lithium batteries may leak or even explode if used improperly

Power Management: Equipped with the world's leading power management system for real-time monitoring of the battery, it can perform high-precision calculations on the charge status to ensure that the battery is always working in a safe state, and increase the battery cycle

The longer joystick greatly reduces the steering force and makes the operation easier

This will effectively control the generation of condensed water

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info