99精品产国品一二三产区,亚洲综合久久久久久888,日本一区二区网址

BYD Warehouse Electric Forklift Operation Tutorial-

Its significance is to tell buyers its ability to travel on raised ground or over foreign objects

When choosing, enterprises should consider their own operating requirements, budget, working environment and other conditions comprehensively to choose the most suitable truck

This is the second basic law of thermal science

Many smaller manufacturers do not have such high requirements for forklifts, so they can choose relatively small electric forklift equipment, which can not only be carried with the vehicle, but also light in weight and occupies a smaller area

There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

The normal height is about 3 meters, and the high height is more than 10 meters

Today, the market is becoming more and more mature, and manual pallet trucks are comfortable, labor-saving and money-saving, and can be called economical and easy-to-use handling tools Second-hand products cannot be guaranteed, so we need to make a careful comparison before purchasing to avoid pitfalls Improve operating efficiency Fast charging mode: 1-3 hours fast charging mode is suitable for multi-shift work

BYD forklift solutions for the logistics industry with high-intensity handling: In the logistics industry, cargo loading and unloading is a relatively normal part of the work

Unmanned forklifts are more efficient, more stable, more accurate and safer than forklifts

I believe everyone knows its manifestations and causes

Comparing the work efficiency between the two, the electric transport truck relies on the power system to easily lift and complete the loading, unloading and carrying tasks, and the electric transport truck only needs manual control of the handle to complete the work, and the continuous working time is longer than that relying on manpower

Check whether the brakes are locked and pay attention to adjusting the brake pad distance of the drive wheel

BYD Warehouse Electric Forklift Operation Tutorial-

High reliability: The explosion-proof electric forklift adopts an advanced hydraulic system, the forklift has high operating reliability and simple maintenance

For the electric transporter itself, its configuration, load, maximum lifting height, fork width, etc

The maintenance method is not difficult

There is a tortoise and rabbit regulator on the handle, and the tortoise speed and rabbit speed can be switched freely

The truck is designed to be "Li-ion Ready" with its controller automatically identifying the battery chemistry (lithium-ion vs

When the battery electric flatbed truck is in operation, the most important thing is to maintain its battery

Low temperature resistant grease In order to prevent the hardening phenomenon caused by low temperature, the working hydraulic oil uses special hydraulic oil that changes its viscosity characteristics under low temperature environment, and the lubricating grease should also be selected with good low temperature characteristics 6

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage

Easy and safe to use: the operation is simple and easy to master, and no professional operator is required; 4

3 Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

Operators of explosion-proof electric forklifts must be qualified to use the equipment, operate it in accordance with regulations, and avoid unnecessary dangers

BYD Warehouse Electric Forklift Operation Tutorial-

Hydraulic device The pump is installed in an oil tank, and a pump motor, a pump and an oil tank body are compactly installed

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

Next, let's see how to do it specifically Full load operation is not allowedcom 3 If necessary, adjust and clean the hydraulic oil valve 7

Have a level of education that is appropriate for the type of special equipment operation for which the forklift license is applied; 4

Different types of forklifts have very different shapes and specifications, and their uses are also different

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

The operation is simple, safe and reliable

Due to the different properties of the fuel used by electric forklifts, electric forklifts can be divided into three types: the first is a forklift that is driven only by electrical energy (such as batteries, lithium batteries), that is, a pure electric forklift; the second is a hybrid forklift; the third is a forklift that is powered by a fuel cell (such as hydrogen fuel)

The operation methods of various electric forklifts are basically the same, but due to differences in models and structures, they also have their own characteristics

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info