少妇人妻av毛片在线看,级毛片内射视频,麻豆果冻传媒精品国产av

BYD forward electric forklift charging process diagram -

Electric transport truck manufacturers remind everyone that the motor, battery and other important parts of the electric transport truck must be checked regularly

When the road surface is uneven and has a slope, it will cause serious wear and tear on the wheels and motor of the 3-ton electric forklift

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

The price of a semi-electric transporter is about 3,000 yuan

Anti-rust and anti-corrosion measures The temperature difference between inside and outside of the cold storage will cause the forklift to "sweat" after leaving the cold storage

This section proposes solutions from the two aspects of mechanical structure and hydraulic system

Avoid closed areas, or maintain the ventilation and drainage performance of the closed system, open the ventilation window to maintain the heat dissipation and ventilation performance of the motor, open a leakage hole at the bottom of the battery box or install a reservoir

For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation

The safety distance is generally 200mm

The latter requires manual pulling or pushing of the forklift, and the lifting is electric

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system The second step is to verticalize the mast 2

When turning the buttons, pay attention and do not turn violently and accelerate quickly

BYD forward electric forklift charging process diagram - At this time, the battery must be unplugged

The above are some of the advantages of BYD lithium battery forklifts

Warehouse work is increasingly inseparable from 3-ton electric forklifts, because the introduction of electric equipment will greatly improve work efficiency and save costs

So, how can we complete the forklift of goods well? Electric forklift manufacturers have prepared a detailed tutorial for everyone

After reaching full production, it will form an annual production capacity of 40,000 electric storage vehicles and key parts

A detailed look at the Class II vehicle market - electric ride-on warehouse vehicles The market for three types of vehicles has indeed seen great development in recent years: The development history can be found in the "Evolution of Pallet Trucks" written by Qin The central idea is to replace manual lifting with electric lifting

According to the latest statistics released by the Industrial Vehicle Branch of the China Construction Machinery Industry Association, the total sales volume of China's forklift market in 2019 (Ⅰ+Ⅱ+Ⅲ+Ⅳ+Ⅴ) was 608,341 units, of which electric forklifts (Ⅰ+Ⅱ+Ⅲ) were 298,637 units, accounting for almost 50%, an increase of 6

It can be divided into electric pallet trucks, semi-electric pallet trucks and manual pallet trucks

Impact of temperature difference inside and outside the cold storage Cold storage forklifts need to work alternately between low temperature and normal temperature environments

The application scenario guarantees the confidence of the product

Strictly follow the following rules: The following is shared by BYD Forklift Editor: 1

warn! Do not operate a forklift with serious functional defects that endanger safety

Security As an industrial vehicle, safety is definitely something we need to pay attention to

BYD forward electric forklift charging process diagram -

Check the fan window; 8

The heat of DC motor is mainly generated in the internal parts of the electric forklift, so most DC motors are equipped with a fan for heat dissipation

In addition to cars and electric vehicles, they can also be used in forklifts, towers, base stations and other scenes

Combination of forklift and vision The combination of 5G unmanned intelligent forklifts and vision can be better applied to various working environments

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

If necessary, add 45# hydraulic oil

If the lifting height of the fork does not reach the required height, add hydraulic oil

Its function is to control the movement of the lifting or tilting hydraulic cylinder valve core through the operating handle according to the needs of the lifting and tilting of the fork, and input high-pressure oil into the lifting or tilting hydraulic cylinder

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

Battery maintenance is also very important, and there are many details that need to be paid attention to

What advantages do lithium batteries have over storage batteries in electric forklifts? In the current battery market, lithium batteries have quickly occupied the market with their advantages of safety, cost reduction, low maintenance cost, long service life, energy saving and environmental protection, and are gradually replacing traditional lead-acid batteries

The minimum mast tilt should be used to stabilize the load to prevent the load from sliding backwards

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

亚洲精品无码一二区a片-制服丝袜国产av无码-乱码午夜-极品国产内射-亚洲精品无码永久电影在线-亚洲综合一区二区三区四区五区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info